AA 8079 Thickness 0.01mm-0.2mm Hydrophil Aluminum Foil For Air Conditioner
Product Description:
The Hydrophilic Foil has a layer coating material, which has the performance of high corrosion resistance. It can be used in a variety of heat exchange constructions where the basic function is to efficiently transfer heat. Also this fin foil can be used for evaporator and condenser in most residential, automotive, and commercial air conditioning units and in humidifiers and other equipment.
Our company can produce aluminium coil used for aluminium/plastic composite panel, and the base material for color coated aluminium coil. The aluminium substrate gets degreased , chemically pre-treated and coated in a single production step which resulting in a high-quality uniform coating reproducible at any time and a material which has been developed for easy processing for a variety of application.
By changing the alloy, we have achieved on the basis of ensuring the fin formability and strength, the thickness of the fin is reduced. And then it can reduce the volume of equipment and improve heat transfer efficiency.
Usages:
1. Mainly for fin stock, air conditioner.
2. Widely used in insulation board
3. Aluminum curtain wall
4. Aluminum-magnesium-manganese roofing system
5. Aluminum ceiling
6. Acp and many other areas
7. Lighting,
8. Printing,
9. Packing,
10. Decorative,
11. Electronics surface,
12. Hot rolled thick plate,
13. PS base plate,
14. Aluminum plastic base plate,
15. Aluminum curtain wall base plate,
16. Aluminum composite panel base plate,
17. Aluminum spacer,
18. Aluminum embossed sheet,
19 Aluminum tread plate
Property:
|
Item
|
Technical data
|
|
Film Thickness
|
1.0-2.0um ( one side average thickness)
|
|
Hydrophilicity
|
Primary contact angle 10° / Continuous contact angle 20°
|
|
Adherence Strength
|
Erich-sen test(pressed depth 5 mm), no peeling off
Grinding test (100 / 100 ) : No separating
|
|
Corrosion Resistance
|
Salt&Spray (72 hours) R.N<9.5
|
|
Alkaid resistance
|
Dipped in 20% Na-OH under 20°C for 3 minutes. absolutely no blister.
|
|
Impregnable resistance
|
Sample weight loss < 1%
|
|
Heat resistance
|
Under 200℃ keep 5 minutes, performance and color unchanged
Under 300℃ keep 5 minutes, coating film become a bit yellow
|
|
Oil proof
|
24 Hours, no blister on the coating layer
|
|
Coating film odor
|
No stranger odor
|
|
Abrasion to mold
|
Same as ordinary aluminium foil
|
Our advantages:
1, Since 2008, we have rich experience in this industry in China;
2, Good reputation in the production of aluminium/aluminum plate areas;
3, We start our productions from aluminum ingot,so we can control the quality as well;
4, We have our own development department for new material research;
5, Good experience and cooperation with big clients in the world;
6, With Certificate ISO9001-2008;
7, High performance cost ratio;
8, Fast delivery time;
9, Customized orders available;
10, Good communication skills, and good service and understandings for customers.
Product Tags:
|
|
Hydrophilic Coating Aluminium Foil Roll Width 100mm-1600mm For Air Conditioner Images
|
